عنوان المقالة:C-22تقييم سلوك التاكسد عند درجات الحرارة العالية لسبيكة انكونيل 600 وسبيكة هستالوي Evaluation of High-Temperature Oxidation Behavior of Inconel 600 and Hastelloy C-22
أ.د. علي سبع حمود | Professor Dr. Eng. Ali Sabea Hammood | 9397
نوع النشر
مجلة علمية
المؤلفون بالعربي
السيد عمار عبد الكريم هاشم,د. علي سبع حمود, د.نوال جاسم حمادي
المؤلفون بالإنجليزي
Ammar Abdulkareem Hashim · Ali Sabea Hammood · Nawal Jasem Hammadi1
الملخص العربي
تقييم سلوك التاكسد عند درجات الحرارة العالية لسبيكة انكونيل 600 وسبيكة هستالوي C-22
الملخص الانجليزي
Abstract The aim of this study was to investigate the oxidation behavior of nickel-base superalloys (Inconel 600 and Hastelloy C-22) by the determination of the oxidation rates of alloys at elevated temperatures and at ambient air. The cyclic oxidation method was adapted by heating of alloys periodically in still air at 900, 1000 and 1100◦C followed by cooling at ambient temperature. The weight change measurement was recorded during the cyclic oxidation tests. The X-ray diffraction and microstructure study were also used as characterization methods to illustrate the properties of studied alloys and oxide film that formed on the surface of oxidized alloys. Inconel 600 and Hastelloy C-22 showed their ability to develop a uniform protective oxide film. The oxide film that formed on both alloys was chromia oxide Cr2O3 with smaller amount of spinel oxide NiCr2O4. The results of the weight gain measurements suggest that the oxidation kinetics of both alloys follows the parabolic behavior during the experimental tests. Also both alloys at 1100◦C exhibited severe spallation of oxide film with linear decreasing in the weight change measurements. The p-kp model was implemented to describe the subsequent cyclic process of oxide growth and spalling.
تاريخ النشر
30/06/2015
الناشر
Arabian Journal for Science and Engineering- Springer-Clarivate Analytics
رقم المجلد
40
رقم العدد
9
رابط DOI
DOI 10.1007/s13369-015-1766-y
الصفحات
2739–2746
رابط الملف
تحميل (404 مرات التحميل)
رابط خارجي
https://link.springer.com/article/10.1007/s13369-015-1766-y
الكلمات المفتاحية
High temperature oxidation · Nickel-base alloys · Weight gain measurements · P-kp model
رجوع