عنوان المقالة: A simple method to determine tramadol using a coated-wire electrode as a detector in the flow injection analysis
أ.د. فدعم متعب عبدون | Prof Dr. Fadam Muted Abdoon | 3600
نوع النشر
مجلة علمية
المؤلفون بالعربي
المؤلفون بالإنجليزي
Fadam M.Abdoon , Shatha Y.Al Samarrai and Kadhim K.Hashim
الملخص الانجليزي
A new simple and fast electrochemical method has been developed, in the current paper, to quantify tramadol hydrochloride in pure solutions and pharmaceuticals, employing the flow injection analysis (FIA) technique. To achieve this, a coated-wire electrode detector has been manufactured using tramadol with phospho molibidic acid in the presence of chlorovinyl benzene. The characteristics of this electrode were studied by assessing the optimal conditions, concentration range, minimal limit of Nernst response, a minimal range of sensitivity, response time, flow rate, the degree of dispersion, accuracy, precision, and detection limits. The study also identified the selectivity of the electrode in the presence of other ions as interferences. The electrode gave the best Nernstian slope of the calibration curve at -58 mV per decade. The response time was 8 s; detection limit 1.2 × 10–6 M; concentration ranged between 100 and 0.01 mM, with a sampling rate of 90 samples per hour. Results of the statistical analysis confirmed that the developed method has high accuracy (the relative error was 0.8192%). The recovered percentage of tramadol from pharmaceutical dosage forms ranged 99.53 to 100.64%.
تاريخ النشر
01/05/2019
رقم المجلد
رقم العدد
رابط DOI
https://doi.org/10.1016/j.microc.2019.01.041
الكلمات المفتاحية
Tramadol hydrochloride Coated-wire electrode Detector Flow injection analysis
رجوع