عنوان المقالة:MWCNTs-Fe3O4 nanocomposite for Hg(II) high adsorption efficiency MWCNTs-Fe3O4 nanocomposite for Hg(II) high adsorption efficiency
جمعه عبدالجواد محمد على | Gomaa A. M. Ali | 20072
- نوع النشر
- مجلة علمية
- المؤلفون بالعربي
- Hamidreza Sadegh, Gomaa A.M. Ali, Abdel Salam Hamdy Makhlouf, Kwok Feng Chong, Njud S. Alharbi, Shilpi Agarwal, Vinod Kumar Gupta
- المؤلفون بالإنجليزي
- Hamidreza Sadegh, Gomaa A.M. Ali, Abdel Salam Hamdy Makhlouf, Kwok Feng Chong, Njud S. Alharbi, Shilpi Agarwal, Vinod Kumar Gupta
- الملخص العربي
- Magnetic carbon nanotubes composite (MWCNTs-Fe3O4) was successfully prepared and characterized using different techniques. MWCNTs-Fe3O4 displays entangled network of oxidized MWCNTs attached with Fe3O4 clusters with specific surface area of 92 m2 g−1. The adsorption performance of as prepared composite was investigated for Hg(II) removal. Several experimental factors affecting Hg(II) adsorption process by MWCNTs-Fe3O4 were studied including, adsorbent dosage, contact time, pH and metal ion concentration. A high adsorption capacity of 238.78 mg g−1 was obtained according to Langmuir model. In addition, pseudo-second-order and the Langmuir isotherm model were used to fit the adsorption kinetic and equilibrium data, respectively. The results recommend the successful application of MWCNTs-Fe3O4 for Hg(II) removal via batch adsorption technique.
- الملخص الانجليزي
- Magnetic carbon nanotubes composite (MWCNTs-Fe3O4) was successfully prepared and characterized using different techniques. MWCNTs-Fe3O4 displays entangled network of oxidized MWCNTs attached with Fe3O4 clusters with specific surface area of 92 m2 g−1. The adsorption performance of as prepared composite was investigated for Hg(II) removal. Several experimental factors affecting Hg(II) adsorption process by MWCNTs-Fe3O4 were studied including, adsorbent dosage, contact time, pH and metal ion concentration. A high adsorption capacity of 238.78 mg g−1 was obtained according to Langmuir model. In addition, pseudo-second-order and the Langmuir isotherm model were used to fit the adsorption kinetic and equilibrium data, respectively. The results recommend the successful application of MWCNTs-Fe3O4 for Hg(II) removal via batch adsorption technique.
- تاريخ النشر
- 04/03/2018
- الناشر
- Journal of Molecular Liquids
- رقم المجلد
- رقم العدد
- رابط خارجي
- https://www.sciencedirect.com/science/article/pii/S016773221830223X
- الكلمات المفتاحية
- Carbon nanotubes; Nanocomposite; Water treatment; Adsorption; Hg(II) removal; Pollutants