عنوان المقالة: A new generation of cable grade poly(vinyl chloride) containing heavy metal free modifier
علي إبراهيم الموسوي | Ali I.Al-Mosawi | 11973
نوع النشر
مجلة علمية
المؤلفون بالعربي
علي إبراهيم الموسوي
المؤلفون بالإنجليزي
Ali I. Al-Mosawi
الملخص الانجليزي
Many additives are used to improve the performance of cables in terms of increasing their flame retardancy, thermal stability, thermal conductivity, and other characteristics. Unfortunately, most of these additives contain heavy metals. Therefore, the main objective of this study is to introduce a material representing a new generation of environmentally friendly heavy metal-free stabilizers for cable grade poly(vinyl chloride) that can compete with traditional materials in terms of performance and distinctive properties. This unique additive is Oxydtron, a synthetic silicate or simply nanocement. The tests performed are rheological properties represented by a capillary rheometry analysis, limiting oxygen index, and volume resistivity. The most significant improvement in Bagley correction measurements was 14.61%; 18.13%; and 27.20% more than poly(vinyl chloride) basic formulation when using 5wt.% Oxydtron at 160°C, 170°C, and 180°C, respectively. Also, the mean increases in relaxation time were 3.200 times, 8.825 times, and 12.458 times more than poly(vinyl chloride) basic formulation with 1wt.%, 3wt.%, and 5wt.% of Oxydtron, respectively. Furthermore, the Oxydtron lowered the value of the accompanying thermal gradient of the L.O.I test, reducing the heat-affected zone. The best result was with the extrusion processing method due to the uniformity of the processing conditions. However, the thermal gradient analysis showed residual heat stress in the test samples after cutting the burning layer and re-testing the samples again; this causes them to burn faster. This situation requires caution for designs that are exposed to high temperatures without burning. The optimum improvement in volume resistivity value was 14.71% and 38.24% more than poly(vinyl chloride) basic formulation after adding 5wt.% and 7wt.% of Oxydtron, respectively.
تاريخ النشر
09/12/2021
الناشر
Journal of Polymer Research
رقم المجلد
29
رقم العدد
1
رابط DOI
http://dx.doi.org/10.1007/s10965-021-02798-2
رابط الملف
تحميل (0 مرات التحميل)
الكلمات المفتاحية
Cable grade; Oxydtron; Plasticized poly(vinyl chloride)
رجوع