عنوان المقالة:تحسين مواصفات طلاء الارضيات بأضافة الاطيان النانوية Improving the Specifications of Floor Coating by adding nanoclay
سيناء ابراهيم حسين | Seenaa Ibraheim Hussein | 5434
- نوع النشر
- مؤتمر علمي
- المؤلفون بالعربي
- سيناء ابراهيم حسين
- المؤلفون بالإنجليزي
- Seenaa Ibraheim
- الملخص الانجليزي
- Abstract: In the present study the effect of weight percentage of nanoclay with epoxy resin coating on mechanical properties ( impact strength , hardness, and wear rate ), Adhesion test and thermal properties (thermogravimetric analysis (TGA), thermal expansion coefficient (CTE),the weight percentage of nano clay at ( 0,1,3,5,7) wt% ,has been investigated.Results indicated,that when increase the weight ratio of nano clay the value of impact strength increased, hardness and decreasing wear rate up 5wt% , and at 7 wt% that the impact strength , hardness would be decreased and wear rate increase due to agglomeration of nano clay . The strength adhesion pull off of the epoxy coating was 1.76 Mpa ,when adding nano clay,improve the adhesion properties of the epoxy coating at the ratio of 5%. The improved the thermal stability of the nanoclay filled with epoxy coating. Thermal stability is very important for coating materials.
- تاريخ النشر
- 20/08/2020
- الناشر
- IOP Conf. Series: Materials Science and Engineering
- رقم المجلد
- رقم العدد
- 881
- ISSN/ISBN
- 1757-899x
- رابط DOI
- doi:10.1088/1757-899X/881/1/012073 1
- الصفحات
- 1-10
- رابط الملف
- تحميل (92 مرات التحميل)
- الكلمات المفتاحية
- Epoxy, nano clay, Impact strength, Hardness, Wear rate, bonding strength, TGA, CTE