عنوان المقالة:التشغيل العلاجي للمحركات المتزامنة ذات المغناطيس الدائم الخالية من الفرشاة المشتقة باستخدام التحكم الموجه تحت خطأ مع الحد الأدنى من التموج “Remedial Operation of Brushless Permanent Magnet Synchronous Motors Derived by Field Oriented Control under Fault with Minimum Ripple
د/ حمدى محمد سليمان حجازى | Dr. Hamdy Mohamed Soliman Hegazy | 6137
نوع النشر
مؤتمر علمي
المؤلفون بالعربي
حمدى محمد سليمان - سامية الحكيم
المؤلفون بالإنجليزي
Hamdy Mohamed Soliman - Samia El-Hakim
الملخص الانجليزي
In critical systems such as transportation, aerospace, medical, military and nuclear power plants, the faults are unwanted. They lead to loss of the human life and capital. In these systems, the reliability of the drive is very important. This paper is addressed this problem and suggested two models to solve it. The first model doesn’t contain any special tools to improve the torque ripples and THD. The second model contains 2PI current controllers to improve the performance at fault and at remedial operation. One is for the torque and the other is for the flux. The first PI controller is feeding from the torque error between the reference and estimated torques to get new q-axis current component representing modifier current arises from uncertain things inside the machine and drive system such as temperature and parameters variations. This current will add to reference q-axis current to get robust new q-axis current to satisfy the drive requirement and solve the torque problem (torque ripples). With robust current, the total harmonic distortion is a decrease but doesn’t reach the best value so the other PI controller is used to adjust the THD. In this PI controller, the d-axis flux is compared to rotor permanent magnet flux to solve this problem arises from non-sinusoidal of the magnetic flux. The output of the PI controller is introduced to the reference d-axis current. The new d-axis current will reach the best value of THD. The simulation of the second controller is compared to the simulation of first controller to show if the second controller strong or weak. Matlab simulink is used to simulate the drive system.
تاريخ النشر
25/12/2012
الناشر
2012 Twentieth International Middle East Power Systems Conference MEPCON
رقم المجلد
رقم العدد
الصفحات
8
رابط الملف
تحميل (95 مرات التحميل)
رابط خارجي
http://www.sayedsaad.com/montada/showthread.php?t=73264&highlight=mepcon+2o12
الكلمات المفتاحية
PMSM, FOC, Remedial Operation, PI Controller, Torque ripple.
رجوع