عنوان المقالة:تحسين مواصفات طلاء الارضيات بأضافة الاطيان النانوية Improving the Specifications of Floor Coating by adding nanoclay
سيناء ابراهيم حسين | Seenaa Ibraheim Hussein | 4377
نوع النشر
مؤتمر علمي
المؤلفون بالعربي
سيناء ابراهيم حسين
المؤلفون بالإنجليزي
Seenaa Ibraheim
الملخص الانجليزي
Abstract: In the present study the effect of weight percentage of nanoclay with epoxy resin coating on mechanical properties ( impact strength , hardness, and wear rate ), Adhesion test and thermal properties (thermogravimetric analysis (TGA), thermal expansion coefficient (CTE),the weight percentage of nano clay at ( 0,1,3,5,7) wt% ,has been investigated.Results indicated,that when increase the weight ratio of nano clay the value of impact strength increased, hardness and decreasing wear rate up 5wt% , and at 7 wt% that the impact strength , hardness would be decreased and wear rate increase due to agglomeration of nano clay . The strength adhesion pull off of the epoxy coating was 1.76 Mpa ,when adding nano clay,improve the adhesion properties of the epoxy coating at the ratio of 5%. The improved the thermal stability of the nanoclay filled with epoxy coating. Thermal stability is very important for coating materials.
تاريخ النشر
20/08/2020
الناشر
IOP Conf. Series: Materials Science and Engineering
رقم المجلد
رقم العدد
881
ISSN/ISBN
1757-899x
رابط DOI
doi:10.1088/1757-899X/881/1/012073 1
الصفحات
1-10
رابط الملف
تحميل (92 مرات التحميل)
الكلمات المفتاحية
Epoxy, nano clay, Impact strength, Hardness, Wear rate, bonding strength, TGA, CTE
رجوع