عنوان المقالة:منع تآكل الفولاذ منخفض الكربون باستخدام المانع الأخضر (البردي) في ظروف متغيرة Corrosion Inhibition Of Low Carbon Steel Using Green Inhibitor (Bulrush) At Variable Conditions
ا.م.د عماد سلام عبود | Dr. Emad Salaam Abood | 5205
نوع النشر
مجلة علمية
المؤلفون بالعربي
رواء زاهد جفات ، عماد سلام عبود
المؤلفون بالإنجليزي
Rawaa Z. Jafat ; Emad Salam Abood
الملخص العربي
تقترح هذه المقالة تأثيرات درجة الحرارة على تثبيط التآكل لمحلول حمض الهيدروكلوريك (HCl) للصلب منخفض الكربون مع عملية إنقاص الوزن. تم اختبار عملية التآكل عند درجات حرارة 25 ، 35 ، 45 ، 55 ، 65 درجة مئوية ، تم استخدام البردي المثبط بتركيزات 0 ، 0.2 ، و 0.5 جم / لتر ، وتم استخدام حمض الهيدروكلوريك كمحلول. تشير التجربة إلى أن زيادة تركيز المثبط يؤدي إلى انخفاض معدل التآكل في محلول حمض الهيدروكلوريك بسبب الانتشار وقابلية ذوبان الأكسجين. كما يزداد معدل التآكل مع زيادة درجة الحرارة وكفاءة تثبيط نبات البردي مع زيادة تركيز المثبط بحد أقصى 97.73٪ عند تركيز 25 درجة مئوية و 0.5 جم / لتر. أوضحت هذه النتائج أن مثبط البردي هو أفضل نتيجة بسبب تكوين طبقة مجاورة أكثر سمكًا وأقوى على السطح المعدني لمنع وصول الأكسجين المذاب إلى السطح المعدني. في نفس الأمر ، تزداد كثافة التيار المحدود مع زيادة درجة الحرارة وتنقص بزيادة تركيز المانع.
الملخص الانجليزي
This article proposes the effects of temperature on corrosion inhibition of hydrochloric acid (HCl) solution for low carbon steel with a weight loss process. The corrosion process was tested at temperatures of 25, 35, 45, 55, and 65oC, the inhibitor bulrush was used with concentrations of 0, 0.2, and 0.5 g/L, and hydrochloric acid was used as a solution. The experiment suggests that increasing inhibitor concentration leads to a decrease in corrosion rate in HCl solution due to diffusivity and oxygen solubility. Also, corrosion rate increases as temperature increment and bulrush inhibition efficiency increase with increasing inhibitor concentration up to a maximum of 97.73% at 25 oC and 0.5 g/L concentration. These results revealed that bulrush inhibitor is the best result due to creating a thicker and stronger adjacent layer on the metal surface to prevent dissolved oxygen to reach the metal surface. In the same matter, limited current density increased with increasing temperature and decrease with increasing inhibitor concentration.
تاريخ النشر
18/10/2021
الناشر
National Information and Documentation Centre (NIDOC), Academy of Scientific Research and Technology, ASRT
رقم المجلد
65
رقم العدد
2
رابط DOI
10.21608/EJCHEM.2021.100140.4655
الصفحات
٥
رابط خارجي
https://ejchem.journals.ekb.eg/article_200133.html
الكلمات المفتاحية
bulrush; corrosion rate; inhibitor efficiency; low carbon steel
رجوع