عنوان المقالة: Modal analysis of Kaplan turbine in Haditha hydropower plant using ANSYS and SolidWorks
عبدالمطلب عبدالكريم محسن | Abdulmuttalib Abdulkareem MUHSEN | 5492
نوع النشر
مؤتمر علمي
المؤلفون بالعربي
المؤلفون بالإنجليزي
Abdulmuttalib A. MUHSEN , Ali A. Resan AL-MALIKI , Bashar H. ATTIYA , Omar Farhan AL-HARDANEE and Karam Aied ABDALAZIZE
الملخص الانجليزي
Abstract. In this study, numerical analysis is conducted to investigate the failure modes in Kaplan turbine. All necessary steps for Kaplan turbine failure analysis are presented in this work using the modal analysis computational approach. The modal behaver analysis is carried out on a model of an existing Kaplan turbine blade, which is based on the existing turbine used in Haditha hydropower plant in Iraq. This work investigates the modal behavior of the blade of interest, which aid in predicting structural damage initiation. The Kaplan turbine blade is designed using the commercial software ANSYS and SolidWorks. To simulate the blade in operation, the blade is fixed from one end, and all degrees of freedom are measured. Moreover, the turbine blade is moved and rotated to simulate multiple operational conditions. Both mode shapes and natural frequencies are predicted and analyzed using the two aforementioned commercial software and the numerical formula involving the arrest Lanczos method. It is clear from the results that the natural frequency of the specified mode shape does not match with the natural frequency of the runner blade. Hence, there is no failure due to resonance phenomenon in this specific Kaplan turbine. The future work must investigate other aspect of the failure modes in such turbine, such as unbalance dynamic loading. The Results obtained from this study will help study the different possibilities for detecting the failure of the Kaplan blade by examining the modal behavior of the blade.
تاريخ النشر
01/06/2021
الناشر
OP Conf. Series: Materials Science and Engineering
رقم المجلد
رقم العدد
رابط DOI
10.1088/1757-899X/1105/1/012056
رابط الملف
تحميل (130 مرات التحميل)
رابط خارجي
https://iopscience.iop.org/article/10.1088/1757-899X/1105/1/012056
الكلمات المفتاحية
Kaplan turbine; Modal analysis; Failure analysis; ANSYS; Solid Works
رجوع